10.0.0.1 is used as a default IP address by the Comcast Xfinity router to identify itself on the network. It is generally used for LANs (Local Area Network) and belongs to the private network 24-bit block.
In this guide, we will explain everything about 10.0.0.0.1 admin login. You can login to 10.0.0.1 with just a single click and open the administration panel to configure the settings.
How to Login into 10.0.0.0.1 Comcast Router?
First of all you need to understand that 10.0.0.0.1 xfinity login doesn’t exist. On a short note 10.0.0.0.1 is wrong IP address. The correct one is 10.0.0.1
If you want to login 10.0.0.1 IP address and connect your home’s router to the network, then just proceed as mentioned below.
Step 1. First, open your default browser and type http://10.0.0.1/ in the address bar.
Generally, 10.0.0.1 is used as the default address to login into Comcast Router. If the 10.0.0.1 admin page doesn’t work you can also enter 192.168.100.1 or 192.162.1.1 to access the admin login page.
💡 Point to note: Make sure that you are not typing https://10.0.0.0.1 as it is wrong and wouldn’t work.
Step 2. Once the login page loads, enter the default username and password of the router.
Step 3. After successful login, the admin panel shall open. Now you can view and edit the settings at your convenience.
Bonus: Below are some admin username and password combinations you can try:
The default admin usernames are:
- Root
- User
- Admin
The default passwords are:
- Motorola
- High-Speed
- Password
- W2402
Once you login to router’s admin you can change various different settings. Even you can change the login page IP address. You can change Xfinity/Comcast router login page from 10.0.0.1 to 10.0.0.0.1 or 10.0.165.25. You can set it anything in the range of between 10.0.0.0 and 10.255.255.255.
But note that, whenever you change it, make sure that you note the new IP address securely for the future.
Must Read
How to Use 10.0.0.1
10.0.0.0.1 comcast login doesn’t exist, it is the wrong address. The correct IP address to login into Xfinity Router is 10.0.0.1 and not 10.0.0.0.1.
Remember an IPv4 address contains only 4 numbers. These are called host addresses. If you enter the correct IP address in a web browser then you will see the login page of your router. Enter login credentials to manage settings. After login, you will see many tabs like LAN, WAN, WLAN, DHCP, DSL, ADSL, MAC, WPS and other security options.
Now you can change, connect other devices and ideally configure router’s settings. If you are browsing it for the first time and don’t know how to configure it, we recommend you to check router’s manual.
If none of the above combinations work, use the table below to find the default Xfinity Router login credentials.
Default Username and Password List for Different Router Models
Each router brand uses a different default username and password. It’s nearly impossible to list all usernames and password combinations here. Therefore we have listed below the most used router’s login combinations. Use the search box to find. You can also see complete list of Default Router Username and Passwords here.
| Router | Login IP Address | Default Username | Default Password |
|---|---|---|---|
| 3Com | admin | n/a | |
| 3Com | n/a | PASSWORD | |
| 3Com | root | !root | |
| ACC | netman | netman | |
| ACCTON | 192.168.2.1 | n/a | 0 |
| Aceex | 192.168.8.1 | admin | n/a |
| Aceex | 10.0.0.2 | admin | epicrouter |
| Actiontec | n/a | n/a | |
| ADC Kentrox | n/a | secret | |
| Adtran | n/a | n/a | |
| AirLink+ | 192.168.1.1 | admin | admin |
| Aiway | 0 | n/a | |
| Allied Telesyn | root | n/a | |
| Allied Telesyn | Manager | Friend | |
| Allnet | admin | admin | |
| Ambit | 192.168.100.1 | user | user |
| Ambit | 192.168.100.1 | admin | password |
| Ambit | root | n/a | |
| Apple | 10.0.1.1 | n/a | n/a |
| Arescom | n/a | atc123 | |
| Arescom | 192.168.1.1 | dsladmin | n/a |
| Bausch Datacom | 10.0.0.2 | admin | epicrouter |
| Bay Networks | User | n/a | |
| Bay Networks | Manager | n/a | |
| Bay Networks | Manager | Manager | |
| Belkin | 192.168.2.1 | n/a | n/a |
| Canyon | 192.168.62.1 | admin | 1234 |
| Cayman | Any | n/a | |
| Cisco | cisco | cisco | |
| D-Link | 192.168.0.1 192.168.1.1 | Admin | Admin |
| D-Link | n/a | admin | |
| Intel | n/a | babbit | |
| Ipstar | admin | operator | |
| Linksys | 192.168.1.1 192.168.1.251 | admin | admin |
| Netgear | 192.168.0.1 | admin | password |
| Netgear | 192.168.0.227 | admin | password |
| Netgear | n/a | 1234 | |
| Sitecom | 192.168.0.254 | admin | admin |
| Sitecom | 192.168.0.1 | n/a | sitecom |
| US Robotic | n/a | 12345 | |
| Westell | admin | sysadmin | |
| X-Micro | super | super | |
| X-Micro | 1502 | 1502 | |
| Xyplex | n/a | access | |
| Zyxel | 192.168.1.1 | admin | 1234 |
| Zyxel | n/a | 1234 | |
| Zyxel | n/a | n/a |
Login Issues! I Am Not Able to Connect to 10.0.0.1
Basically, there are 3 main reasons for not connecting to 10.0.0.1.
1. Wrong IP Address
As 10.0.0.0.1 (has one extra zero) is similar to 10.0.0.1 there may be a chance that you entered the wrong IP address. Don’t worry you are not alone, many people get confused.
If you have changed the default login address from 10.0.0.1 to something in the past and don’t remember, then try to reset the router to its default settings. You can find the reset button at the back of the router or read below.
2. Forgot Username and Password
Every router is secured by a password so that no one can access your router settings instead of you. You can find the username and password at the back of the router printed on the sticker. If somehow it doesn’t work see the Default Username and Password List for Different Router Models.
3. Router Login Page Not Loading
Check if the PC is connected to wi-fi connection and ensure that you are typing the correct IP address that is 10.0.0.1 and not 10.0 0.0 1, 10.0.0.0.5, 10.0.0.0.5, 10.0.0.0.5 or 10.0,0,1.
Popular Routers That Use 10.0.0.1 Ip Address for Login
| Xfinity Comcast Router and Gateway |
| Netcomm N3G9W |
| Arris TG1682G |
| Alfa AP51 |
| Cisco Routers |
| Lucent AS-2000 |
These Ip Addresses Are All Wrong
- 10.0.0.0.1
- 10.00.1
- 10.0 0.1
- 10.0.0 01
The CORRECT Way to Write the 10.0.0.1 Ip Address:
There are only 2 ways to write the 10.0.01 IP address in your browser’s address/URL bar are:
- 10.0.0.1
- http://10.0.0.1/
Useful Articles
Conclusion
Let’s summarize it, we have figured out that the 10.0.0.0.1 Xfinity login IP is incorrect, and the correct way to access the router panel.
Throughout the blog, we have also discussed what would you do if you were stuck with router problems like the router login page not loading and all.